SL1
Manual Definite Length Tape Dispenser

 

This small manual benchtop definite length dispenser accepts most tapes up to 1″ wide with a maximum roll diameter of 5 -1/2″ on a 1″ or 3″ core. A simple push on the smooth action lever will deliver up to 4″ of tape. The longer lengths of tape can be achieved by multiple pushes of the lever. To change the tape length loosen the thumbscrew holding the lever, move the lever to the desired position and tighten the thumbscrew. The cutting of the tape is done as the operator lifts the tape against the blade as the tape is being removed from the machine.

 

Characteristics​

  • Manual definite length tape dispenser.
  • Simply pull the handle and the desired length of tape is dispensed. To cut the tape, pull the tape up against the blade.
  • Works with most types of non-reinforced tapes up to 1 inch wide.
  • Can dispense up to 4 inches of tape per pull of the handle.
  • Easy to adjust for tape length using a thumb screw, no tools required.
Product Details
Load Type
Top
Min. and Max. Tape Width
Min 1/4" and Max 1"
Min. and Max. Tape Length
Min 3/8" and Max 4"
Machine
7 1/2 inch (L), 4 inch (W), 4 1/2 inch (H)
Weight
3 3/4 Lbs
Core Size
1 inch and 3 inch
Tape Width
Max 1 inch
Max Tape Roll Diameter
5 1/2 inch
Scroll to Top